Oil slick...

After routing the p'up cavities and drilling the control holes it's had a good sanding and received its first coat of oil

Pick up the walnut

Bobbins made. I've wrapped some paper around the steel pole pieces to provide a tiny bit of separation from the windings

3 hours later the p'ups are wound and tested. The neck comes out at 6.45k and the bridge a little hotter, with an extra thousand winds, comes out 7.6k.
The neck has alnico 2 and the bridge alnico 5 magnets.

Should look nice!

Next job to get the p'up routes done...

Next job first the p'ups is wax potting!